A status determination statement (SDS) is the document a client uses to tell a worker, and the party it contracts with, whether the off-payroll working rules (IR35) apply to an engagement. To be valid, it must state the conclusion, give the reasons for it, and be made with reasonable care. It should be issued before the first payment is made. If the SDS is missing or invalid, the client becomes responsible for deducting the tax and National Insurance. The client must also run a disagreement process and respond to any challenge within 45 days.
The SDS is where your status decision becomes visible to everyone else in the chain. It is also the first thing HMRC asks for in a compliance check. A good one shows your reasoning and protects you. A weak one, or none at all, moves the liability straight back to you. This guide covers what an SDS must include, who must receive it and when, and how to handle disagreements.
Last updated 18th November 2026
What is a status determination statement?
An SDS is the client's written decision on whether a worker engaged through an intermediary, usually a personal service company, would be an employee if they were engaged directly. It is how the decision passes to everyone who needs it, so the right party deducts the right tax.
Who has to issue an SDS?
The client: public authorities, and medium and large private sector organisations. Small private sector clients do not, because the worker's own company decides instead. If a small client issues an SDS by mistake, it should withdraw it. See IR35 small company threshold changes. You can use a third party to make the determination or write the SDS, but you stay responsible for its accuracy and for making sure it reaches the right people.
Who must receive it?
- The worker
- The party you contract with, such as an agency or the worker's company. That party passes it down the chain to whoever pays the worker's company (the fee-payer).
If you do not pass the SDS on, you become responsible for deducting tax and National Insurance and paying it to HMRC. The same applies to anyone further down the chain who fails to pass it on. See who is responsible for IR35.
When should you issue it?
Before the engagement starts, and in any case on or before the date of the first payment. If payments are made before the SDS is issued, responsibility for the tax stays with the party that has not passed it on.
Issue a new SDS whenever the role, scope or working practice changes enough to affect the decision.
What format should it take?
The law does not set a format. An email, a letter or an online portal all work, as long as the worker can knowingly receive and access it. Advertising a role as inside or outside the rules is not enough on its own.
What must an SDS include?
HMRC sets three tests for a valid SDS. Miss any one and the SDS is invalid, which makes you responsible for the tax.
| Requirement | What it means in practice |
|---|---|
| A conclusion | Whether the worker would be an employee (or office holder) for tax and National Insurance if engaged directly by you, ignoring the other parties in the chain |
| Reasons | Why you reached that conclusion, based on employment status principles, with enough detail for the worker and the fee-payer to understand it and challenge it if they disagree |
| Reasonable care | The decision was made carefully, on the facts of the engagement. See what reasonable care means for IR35 |
What does a good SDS look like?
There is no prescribed form, but a strong SDS usually covers:
- The parties and the engagement: the client, worker, worker's company, agency or supplier, role, start date and expected duration.
- The conclusion: inside or outside the off-payroll working rules.
- The reasons, factor by factor: control, substitution, mutuality of obligation, financial risk, equipment, integration and any other relevant factors, based on how the work is actually done as well as the contract.
- How the decision was made: who made it, the evidence used, and any tools such as CEST or advice relied on.
- The date and when it will be reviewed.
- How to disagree: who to contact, and that you will respond within 45 days.
Can you use an SDS template?
A template helps keep the format consistent, but the content must be specific to each engagement. A generic SDS, or the same one sent to a group of workers whose roles differ, will not show reasonable care. HMRC gives a blanket SDS sent to every contractor as an example of failing the test.
What happens if the SDS is wrong or missing?
| Problem | Consequence |
|---|---|
| No SDS issued, or not passed on | The client (or the party that failed to pass it on) becomes responsible for the tax and National Insurance |
| SDS issued after the first payment | Responsibility stays with the party that has not passed it on for payments made before it |
| No reasons, or no reasonable care | The SDS is invalid, and the client is responsible |
| The decision is wrong but reasonable care was taken | The fee-payer stays responsible for the deductions |
For what an invalid SDS can cost, see IR35 fines and penalties.
What if a worker disagrees with the SDS?
Every client must run a disagreement process. The worker, or the deemed employer (the fee-payer), can make representations, in writing or verbally. Other parties in the chain cannot.
As a minimum you must:
- Consider the representations.
- Respond within 45 calendar days, starting from the day you receive them.
- Either confirm the SDS is correct and give your reasons, or withdraw it and issue a new SDS, stating the date it applies from.
- Take reasonable care over any new SDS, and include the reasons for it.
If you do not meet these minimum requirements, responsibility for deducting tax and National Insurance on further payments moves to you, even if you took reasonable care over the original decision. For a step-by-step guide, see how to handle an IR35 status disagreement.
Your SDS checklist
- Decide status for each engagement individually, based on the contract and how the work is actually done.
- Make sure the SDS states the conclusion and the reasons, factor by factor.
- Issue it before the engagement starts, and no later than the first payment.
- Send it to the worker and the party you contract with, and record that you did.
- Tell the worker how to disagree, and respond to every disagreement within 45 days.
- Review the SDS when the role, scope or working practice changes, and issue a new one if the answer changes.
- Keep the SDS, the evidence and the reasoning together, ready for HMRC.
How CoComply helps
CoComply makes an individual determination for each engagement, produces an SDS with the conclusion and reasons, sends it to the worker and the party you contract with, and tracks disagreements against the 45-day deadline. Every SDS is stored with its evidence, so you can show HMRC how each decision was made.
Be certain.
Next step: Book a demo to see how CoComply issues and tracks status determination statements.
Frequently asked questions
What is a status determination statement (SDS)? The client's written decision on whether the off-payroll working rules (IR35) apply to an engagement, with the reasons. It goes to the worker and the party the client contracts with.
What must an SDS include? The conclusion on whether the worker would be an employee if engaged directly, the reasons for that conclusion, and it must be made with reasonable care.
Who receives the SDS? The worker and the party the client contracts with, such as an agency or the worker's company. Each party in the chain passes it on to the next.
When should an SDS be issued? Before the engagement starts, and no later than the first payment. Issue a new one if the role or working practice changes.
What happens if we do not issue an SDS? The client becomes responsible for deducting the tax and National Insurance and paying it to HMRC.
How long do we have to respond if a worker disagrees? 45 calendar days from the day you receive the representations. If you do not respond in time, responsibility for the tax on further payments moves to you, even if you took reasonable care.
Can we use an SDS template? Yes, for consistency, but the conclusion and reasons must be specific to each engagement. A generic or blanket SDS will not show reasonable care.
Sources
- HMRC Employment Status Manual: Status Determination Statement (ESM10012)
- HMRC Employment Status Manual: what constitutes a valid SDS (ESM10013)
- HMRC Employment Status Manual: reasonable care (ESM10014)
- HMRC Employment Status Manual: client-led status disagreement process (ESM10015)
This article is for general information only. CoComply does not provide legal, tax or accounting advice, so we recommend speaking to a qualified adviser before making changes based on its content


